This article is about configuring FreeNAS (v. 8.2 BETA 3).
If you haven’t yet installed FreeNAS have a look at Installing FreeNAS to USB stick first.
We will assume that FreeNAS was installed and running on a remote computer with IP address of 192.168.1.210. Your installation most probably will have a different address. It also happens I have another installation of FreeNAS 7 and the computer is named freenas. Therefore the FreeNAS 8.2 computer is named freenas2.
If I type the IP address mentioned above in a web browser I will see the web interface home screen for FreeNAS as shown below:
You will notice the blinking button that says “Alert” on the right side of the screen. It prompts you to change the admin password (by default there is no password and anyone can access the FreeNAS GUI). Click it and it will take you to the form when you can change the password. You also can reach the form by using the tree-like navigation on the left part of the screen – expand Account -> Admin Account -> Change Password
Next time you will be asked for username (which is admin by default) and password (the one you set up above).
If you check the Change root password as well it will set the root password with the password you typed above.
Next expand Network -> Global Configuration. Here fill in the Hostname, Domain, Default gateway, Nameserver 1 and press the Save button:
You can find most of this information if you open a command prompt (DOS prompt) and type ipconfig /all:
FreeNAS can send you status reports about the system. In order this to work you need to configure the Email settings. From the navigation on the left expand System -> Settings and click the Email tab. The configuration shown below will work if you have a GMail acount. You should be able to figure out what to put in the boxes if you want to use a non-GMail account. Save the settings and click Send Test Mail to confirm it works:
These are some of the settings that I would typically adjust on a newly installed FreeNAS. There are additional setting and I encourage you to explore them. If you need more information you can always click the Help button on the tool bar.
Please make sure to check the next post
Posted in CodeProject, FreeNAS, Howto
|
Tagged Configuration, freenas
|
1 Reply
This is the current article that describes the simplest way of installing FreeNAS on USB stick in Windows without burning installation CD first. There is an old post about installing FreeNAS on USB stick which is available here but it is more complicated and I encourage you to use this one instead. Here is how it works: 1) Download 7-zip and install it. If you have another program installed that can work with compressed files you may want to use it instead of 7-zip. 2) Download Image Writer for Windows. Make sure to get the file that ends in binary.zip. I copied the file to C:\Temp and extracted the files into C:\Temp\win32diskimager-binary. 3) Download the FreeNAS from SourceForge The latest stable version at the moment of writing is 8.0.4. I however decided to go with the 8.2 BETA 3 which is the latest available at the moment. You need the file ending in .img.xz FreeNAS files I downloaded the file and placed it in C:\Temp 4) Open the file you downloaded in the previous step with 7-zip and extract its content: It produced a file named FreeNAS-8.2.0-BETA3-x64.img 5) Write the .img file to your USB stick using the Image Writer: Note: You need 2GB USB stick or bigger. That’s all. Reboot your computer and make sure the boot from USB is the first choice in the BIOS. Here is the FreeNAS Documentation Project page that gives you additional information about how to install FreeNAS on USB stick in Linux or OS X:
A QR code (short for Quick Response) is a two-dimensional code originally designed in Japan and initially used in the auto industry. You can use them to encode and store textual information, link to a web site, a vCard, etc. For more information refer to Wikipedia In order to be able to read QR codes with your smart phone you need to install a QR code reader. Here are some suggestions: iPhone – Bakodo – Barcode Scanner and QR Bar Code Reader Android – i-nigma Barcode Scanner Windows Phone 7 – NeoReader BlackBerry – ScanLife Barcode There are many QR readers out there – it is up to you to choose the one you like the best. So what about generating your own QR codes? You can do this as well. Go to http://goqr.me and start creating your own QR codes for free. Here is some video on you tube about how to use QR code with vCard: Google Music is a service that allows you to buy, organize and play music online. Among other things you are allowed to upload up to 20,000 songs from your personal music collection for free. The bad thing is that it is officially offered only in US. The good thing is that there is a work-around. I cannot comment on whether it is illegal or not to use the work-around and I am just providing information that can be found elsewhere and I am not suggesting you should use it. If you do it is at your own risk. Step 1) Sign up for Google Music and upload your music to the cloud (Google Music servers) Google Music will check whether your computer’s IP address is an US one only the first time (when you register for the service). You need to get a temporary US IP address. One easy way is to download and install Hide My IP (http://www.hide-my-ip.com/). You can use it for free for 14 days – more than enough. Run the program. Open it from the system tray, check the “Request US Based IP” check-box and press “Hide My IP” button. After few seconds you will be given a new US based IP address as shown below: Now go to http://music.google.com Install the application on your computer, run it and tell it where you store your music collection – there are several choices (iTunes, Music folder, etc.). The application will start uploading your music to Google Music in the background (you need to be connected to internet). You are done with this step. Now you can play your music from any computer connected to internet directly within your browser. Just go to music.google.com, log in and start streaming (you do not need US IP address to play or upload music – it was necessary just when you signed up). Step 2) Install Google Music on your Android-based phone. It is even better if you can play your music on your mobile phone – after all it is always with you. If your phone is not US based you will not be able to install Google Music app from Android Market. Again there is a work-around. Download the application package file (.apk) for Google Music from http://forum.xda-developers.com/showthread.php?t=1350348. Download it to your Android phone – it will be saved to the SD card. Next install AppInstaller from https://market.android.com/details?id=com.funtrigger.appinstaller on your phone. Run it and use it to install the .apk file you downloaded earlier. This will install Google Music app on your phone and you can listen to your music stored online. Tip: To make songs available offline, click on the triangular menu button in the corner of the album or track title and check the “available offline” box. That’s it. Best Buy Canada had this all in one color laser printer/scanner/copier/fax on sale for Boxing day. The price was too good to ignore it. I bought it on-line and it should arrive soon. I am posting some links below that will allow me to find the information easier later. I just found this article that helped me to find the answer about the weird results with my log files produced by ASP.NET application: log4net contextual properties and ASP.NET Big thank you to the author! It is locked to Virgin Mobile network but you can unlock it and can use it with any provider. At first I tried htcsimunlock.com. I paid $13.49 USD. Shortly got an email telling me they could not find the unlock code for my phone and that they have to do a “Deep Search” asking for additional $14.99 USD. I did not like it and requested refund. Next I tried another site – htcimeiunlock.com. This time I paid $25 USD and 8 minutes later I got an email with the unlock code. It worked and now I have really nice compact android phone that works with all providers. Find out more about the phone below: Here is the user manual: A lot of people know how to restore an SQL Server database using the SQL Server Management Studio. Sometime it will not work if the database is in use. You have to close all active connections or even to take database offline and then online again. It is much easier to restore the database via the attached script. Just unzip the file to a folder called C:\RestoreDB and copy the backup file to the same folder. Then edit RestoreDB.bat file and update it with the appropriate information – server name, user name, password, backup name, etc. The last step is to run RestoreDB.bat – you can double-click it in Windows explorer or can oped a DOS prompt change the folder to C:\RestoreDB and run the script by typing its name and pressing “Enter” key. For few days now I am a proud owner of a new grill – Weber Genesis EP-310 Premium Edition. Why it is so good? Because it is really well made and uses stainless still grates for starters. Took me 2-3 hours to assemble it at home and I could see at first hand it was a quality built product. Very solid. Here is a review about this same model: Weber Genesis EP-310 Premium Edition – Gas Grill Review More useful links: There is a really nice article about grilling outdoors available here: A Complete Guide to Outdoor Grilling: Set Up, Stay Safe, and Cook Great Food Installing FreeNAS to USB stick (new and simpler way) FreeNAS is an Open Source Storage Platform based on FreeBSD and supports sharing across Windows, Apple, and UNIX-like systems. It comes with a lot of protocols and services Installing FreeNAS to USB stick (new and simpler way)
QR codes
Google Music on Android Phone
Accept the terms of service and click the “Download Music Manager” button:
Samsung CLX-3185FN
log4net contextual properties and ASP.NET
HTC Wildfire S
Today I bought HTC Wildfire S – my first Android phone. It is just 149.99 CAD from Virgin Mobile with a pre-paid plan. I chose a smart phone plan for $40. I paid under 200 CAD for the phone, the plan and any taxes. Script to restore SQL Server database
New Grill
How to install FreeNAS to USB stick
Note: This post is more than an year old. You can still use it to install FreeNAS on USB but I strongly recommend you to read the new one first which is much simpler: